Données

 Retour    Imprimer

Détails techniques

Informations supplémentaires

Gubisch type EST-H 2000/2
---------------------------------
!Machine still in use and can be viewed!
Including Aigner tools built 2010:
IV68/78/88 wood-wood-aluminum Eurofold + 4mm rebate clearance

Manufacturer description:
---------------------------------
one-sided angle combination for window and door production consisting of
tenoning and slotting machine, angle transfer and milling machine

Crosscut saw:
---------------------------------
P = 3 kW
U = 3000-1
Saw diameter: 400 mm
Flange diameter: 80 mm
Adjustment: horizontal: man. adjustable,
readable from mechanical digital display
Adjustment range: 0-120 mm

Length stop LAS
---------------------------------
Adjustment: manual
Length: extended to 3.2 m

Slotting unit (cross machining)
---------------------------------
P = 9.2 kW
U = max. 4500 depends on your
tools and is adjusted accordingly
Clamping height: 300 mm
Useful height: 300 mm
Shaft diameter: 50 mm
Largest tool diameter: 400 mm max., 240 mm min.
Adjustment: vertical
Adjustment range: vertical 210 mm under table
Number of tools: 3 tool sets of 100 mm each
provided by customer 0-height 10 mm
Shortest workpiece: 320 mm + tenon
Narrowest workpiece: 48 mm
Widest workpiece: 170 mm
1. Profile spindle
---------------------------------
Position of the spindle: vertical right
Function: profile production and automatic synchronous immersion
P = 9.2 kW
U = 6000 rpm
Clamping height: 100 mm
Useful height: 100 mm
Diameter: 50 mm
Flight circle diameter: 100 - 240 mm
Adjustment range: horizontal 70 mm, tool 0-height 10 mm
Number of tools: 1 a 100 mm clamping length max.

2. Profile spindle
---------------------------------
Position of the spindle: vertical right
Function: profile production
P = 9.2 kW
U = 6000 rpm
Clamping height: 300 mm
Useful height: 300 mm
Diameter: 50 mm
Flight circle diameter: 100 - 240 mm
Adjustment range: horizontal 70 mm, vertical 100 mm for tool 0-height 10 mm
Number of tools: 3 at 100 mm clamping length max.

3. Profile spindle
---------------------------------
Position of spindle: vertical right
Function: profile production
P = 9.2 kW
U = 6000 rpm
Clamping height: 300 mm
Useful height: 300 mm
Diameter: 50 mm
Cutting circle diameter: 100 - 240 mm
Adjustment range: horizontal 70 mm, vertical 100 mm for tool 0-height 10 mm
Number of tools: 3 at 100 mm clamping length max.

4. Profile spindle (glass bead saw unit)
---------------------------------
Position of spindle: horizontal top, right
P = 3.0 kW
U = 3000 rpm
Cutting circle diameter: 250 mm
Clamping flange mount: 60 mm diameter
Hydraulic adjustment: automatic up/down, forward/backward for 1 Basic height
and 1 basic depth

Other technical details
---------------------------------

Clamping table slot unit
---------------------------------
On ball guide bushing and roller guides
Manual swivel range: 60 degrees in both directions

Speeds: 0 - 28 m/min. continuously adjustable
4 speed ranges fast feed in front of slot unit
slow feed in cutting area adjustable
fast feed for transfer
fast return

Counter wood: counter wood changes automatically
with spindle stroke

Transfer type in profile area: occurs automatically

Operating mode: individual part production, frame by frame
Production and series production possible

Longitudinal profiling
---------------------------------
Width adjustment: against manual. Revolver stops
Differences of up to 30 mm are absorbed by the pneumatically
sprung stop ruler
Range: 48 - 170 mm
Feed
---------------------------------
Continuous, infinitely variable feed,
Drive power 1.5 kW
Feed return: touch-button operation with
safety key switch extremely short feed roller distance
Feed speed infinitely variable
*Automatic glass bead removal including glass bead pull-out device
*Manual lubricant pump in the longitudinal profiling machine
*Double parts package for processing 2 workpieces with the same profile
simultaneously
in the slot unit and automatic separation in front of the
longitudinal profiling machine
*2 pneumatic program-controlled side impacts
*Machine with normal operating tools, but without processing tools

Central control
---------------------------------
Electronic PC control, including screen operator guidance with 60 freely
programmable programs, including memory protection in the event of a power
failure

*Operating voltage 380 volts, 50 Hz., IP 44 in accordance with VDE regulations

6 motor brakes
*The machine is designed in accordance with German regulations and standards

The following machine parts are controlled automatically:
---------------------------------
*Clamping table
*Counter wood
*All processing spindles in the slotting and milling area
*Transfer from transverse to longitudinal processing
*Including return device
*Including 1 light measurement stop
*Including 1 laser
---------------------------------
Price of the above machine on request!
---------------------------------

(technical data according to the manufacturer - no guarantee!)