Arkusz

 Powrót    Drukuj

Dane techniczne

Informacje dodatkowe

Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled
-----------------------------------------------------------------------
Machine functionally checked by our technician
Short summary:
-----------------------------------------------------------------------
6 spindles with 8,000 rpm
5 x HSK/Powerlock
Axial and radial CNC adjustment of the spindles via control
CNC - controlled adjustment and positioning of the feed


Detailed description:
-----------------------------------------------------------------------

Technical specifications:
Working width: 20-230 mm
Working height: 8-120 mm

Number of spindles: 6

1. Tool holder - below
------------------------------------------------
Motor with brake: 5.5 kW
Spindle diameter: 40mm
Speed: 6,000 rpm
Tool flight circle: 93 - 160 mm
Axial adjustment range: 5 mm
Rebating device
MarathonCoatin for table insert in front of 1st lower tool holder

2. Tool holder - PowerLock - right
------------------------------------------------
Motor with brake: 11.0 kW
Common motor with left tool holder
Speed ??including high-performance ball bearing: 8,000 rpm
Tool flight circle 40 mm below table level: 93 - 200 mm
Tool flight circle 55 mm below table level: 93 - 180 mm
Tool cutting circle for straight cutter heads max. 163 mm
Max. tool diameter behind stop level: 180 mm
Max throat depth: 35 mm
Axial adjustment range: 55 mm
Spindle axially and radially CNC controlled

3. Tool holder - PowerLock - left
------------------------------------------------
Motor with brake: Common motor with the 2nd spindle
Speed ??including high-performance ball bearing: 8,000 rpm
Tool flight circle 40 mm below table level: 93 - 200 mm
Tool flight circle 55 mm below table level: 93 - 180 mm
Tool cutting circle for straight cutter heads max. 163 mm
Max throat depth: 35 mm
Axial adjustment range: 55 mm
Spindle axially and radially CNC controlled

4. Tool holder - PowerLock - above
------------------------------------------------
Motor with brake: 7.5 kW
Speed ??including high-performance ball bearing: 8,000 rpm
Tool flight circle: 93 - 200 mm
Tool cutting circle for straight cutter heads max.: 180 mm
Max throat depth: 35 mm
Axial adjustment range: 40 mm
Divided pressure shoe in front of the upper tool holder, on tool flight circle
adjustable and pivoting away from the tool, spring-loaded.
Radial CNC-controlled spindle

5. Tool holder - PowerLock - above
------------------------------------------------
Motor with brake: 7.5 kW
Speed ??including high-performance ball bearing: 8,000 rpm
Tool flight circle: 93 - 200 mm
Tool cutting circle for straight cutter heads max. : 180 mm
Max throat depth: 35 mm
Axial adjustment range: 40 mm
Divided pressure shoe in front of the upper tool holder, on tool flight circle
adjustable and pivoting away from the tool, spring-loaded.
Spindle axially and radially CNC controlled

6. Tool holder - PowerLock - below
------------------------------------------------
Motor with brake: 7.5 kW
Speed ??including high-performance ball bearing: 8,000 rpm
Tool flight circle: 93 - 200 mm
Max throat depth: 15 mm
Axial adjustment range: 35 mm
Radial CNC-controlled spindle

feed system
------------------------------------------------
Frequency-controlled feed, infinitely adjustable with brake: 4 kW, 5 - 30 m/min
Feed roller in front of the 1st lower tool pneumatically controlled up/down.
Durofer toothed rollers (Weinig patent) with depth limiter and self-cleaning.
Adjustment range of the feed rollers compared to the left tool holder, axial 35
mm
Reduction of the feed roller distances to 510 mm,
including additional feed rollers after the upper tool holders
(diameter 140 mm) and shortened roller spacing, roller width 50 mm

machine electrics
------------------------------------------------
Operating voltage 400 V (voltage range 380 - 420 volts), 50 Hz.
Electrical design according to DIN VDE 0113, electrical equipment from
Industrial machinery EN60204, IEC-204-1. Other electrical regulations are
not considered.

Machine stands, tables and stops
------------------------------------------------
Dressing table: 2500 mm long (including joint ruler)
Manual Waxilit pump for table resin removal

A driven rubber roller in the outfeed table - 50 mm wide
A driven, hardened steel roller in the machine table, spring-loaded - 150 mm
broad

pressure elements and guides
------------------------------------------------
A lateral pressure roller in front of the left tool holder, moving and
sprung.
Lateral pressure roller on the infeed table, spring-loaded

machine operation
------------------------------------------------
Control: memory function
For saving the setting values ??of profiles.
Tool holder axes with electronic digital displays.
Function:
Saving the setting values ??of the manufactured profile at the push of a button
under a profile number.
If the profile number is selected again, the electronic double displays show
the setting values.
By manually adjusting the tool holders, the displays in
matched. 99 memory locations.
Basic equipment for installing the CNC-controlled adjustment
and positioning

3 x axial CNC-controlled adjustment and positioning of the tool holders
in conjunction with the memory function for tool holders 2,3,5

5 x radial CNC-controlled adjustment and positioning of the tool holders
in conjunction with the memory function for tool holders 2,3,4,5,6

CNC - controlled adjustment and positioning of the feed
high/low in connection with the memory function

Lubrication points for the axial tool holder adjustment.
Central location of greasing points at the front of the machine.

safety and soundproofing
------------------------------------------------
Full security fairing
Electromagnetic locking of the safety cover
interior light
------------------------------------------------
Machine without machining tools - Optionally available (New):
1 piece spiral planer cutter head (left-hand rotation)
Ø 125 x 240 x 40 mm; Z=2 (48)

1 piece LP tool

2 pieces planing head system / 37 Enshin
Ø 125 x 130 x 40 mm, Z=4

2 pieces planing head system /37 Enshin
Ø 125 x 230 x 40 mm. Z=4

8 pieces HS planer blades system Enshin
Ø 130 x 12 x 2.6 mm

8 pieces HS planer blades system Enshin
Ø 230 x 12 x 2.6 mm
------------------------------------------------
Price of the above machine and optional tools on request!
------------------------------------------------
(Technical information according to the manufacturer - without guarantee!)