Engelfried Maschinentechnik GmbH
Tel.: +49 (7361) 9866-0
Szczegóły oferty | |
Sklad numer | 1305-2745 |
Typ maszyny | Linia produkcji okien |
Fabrykant | WEINIG |
Typ | Unicontrol 6 NC-Spindeln |
Rok budowy | 2010-2011 |
Rodzaj sterowania | NC |
Miejsce skladowania | Oberkochen |
Kraj pochodzenia | Germany |
Czas dostawy | immediately |
Podstawa Transportowa | ex warehouse |
Tenoning spindle | 1 Stk. |
Number of milling agregates | 5 St. |
Spindle diameter | 50 mm |
control | Weinig PC-Nexus |
# 2745 Weinig Unicontrol 6 with NC spindles
------------------------------------------------
Technical data summary
(please inquire about any additional accessories included)
Pos. 1: Crosscut saw
------------------------------------------------
> Number of tools: 1 piece.
> Spindle speed: 2,800 rpm
> Spindle diameter: 40 mm
> Tool diameter max.: 400 mm
> Motor power: 3 kW
> Adjustment path radially pneumatically controlled to 8 positions,
e.g. for edge rounding from above
> Laser directional light to detect the saw section
Pos. 2: Rounding unit horizontally at the bottom
------------------------------------------------
> Position: horizontally bottom
> Motor power: 1.5 kW
> Spindle diameter: 20 mm
> Clamping length 25 mm
> Spindle speed: 9000 rpm
> Tool flight circle max.: 130 mm
> Adjustment path axially mechanically coupled to crosscut saw
> Adjustment path radially pneumatically controlled on/off
Length stop NC controlled
------------------------------------------------
> Length 3500 mm
> electronic length stop
Pos. 3: Tap and slot spindle
------------------------------------------------
> Number of tools: variable, infinitely variable, NC
> Tool clamping length: 320 mm
> Vertical spindle stroke: variable 254 mm, infinitely variable, NC controlled
> Spindle speed: 3500 rpm
> Tool flight circle max. 320 mm
> Spindle diameter: 50 mm
> Tool diameter max.: 320 mm
> Motor power: 11 kW
Pos. 4: 1. Profiling spindle (synchronous and counter-rotation)
------------------------------------------------
> Position: vertical right
> Number of tools: 1 piece.
> Tool clamping length: 120 mm
> Spindle speed: 6000 rpm
> Spindle diameter: 50 mm
> Tool flight circle max.: 232 mm
> Motor power: 11 kW
Pos. 5: 2nd profiling spindle
------------------------------------------------
> Position: vertical right
> Number of tools: variable, infinitely variable, NC
> Tool clamping length: 320 mm
> Vertical spindle stroke: variable 254 mm, infinitely variable, NC controlled
> Spindle speed: 6000 rpm
> Spindle diameter: 50 mm
> Tool flight circle max.: 232 mm
> Motor power: 11 kW
2 feed rollers axially pneumatically controlled opposite the spindle, 2
positions
Rung guide consisting of:
Guide ruler in the stop (area of synchronous spindle),
Rung support bar from above in the area of the profile milling unit vertically
on the right
and profiling spindle.
Pos. 6: Profile milling unit horizontally at the top
------------------------------------------------
> Clamping length: 40 mm
> Spindle diameter: 40 mm
> Motor power: 3.8 kW
> Speed 9,000 rpm
> Tool flight circle max. 130 mm
> Axial adjustment range 30 mm, 8 positions
> Radial adjustment path 125 mm, 8 positions
Pos. 7: 3rd profiling spindle (fittings spindle)
------------------------------------------------
> Position: vertical right
> Tool clamping length: 160 mm
> Axial adjustment range 115 mm, 8 positions
> Radial adjustment range 110 mm, 8-fold turret
> Spindle speed: 5850 rpm
> Spindle diameter: 40 mm
> Tool flight circle max.: 210 mm
> Motor power: 3.8 kW
Pos. 8: Profile milling unit/grooving unit from below
------------------------------------------------
> Motor power: 3.8 kW
> Tool clamping length: 125 mm
> Axial adjustment range 100 mm, 8 positions
> Radial adjustment range 100 mm, 8-fold turret
> Spindle speed: 5850 rpm
> Spindle diameter: 40 mm
> Tool flight circle max.: 200 mm
Other features
------------------------------------------------
> online capable
> Electric feed height adjustment including mechanical digital display
and manual feed beam clamping
> Folding device for tear-free folding
> Double parts package
> Return conveyor for 1-man operation: slat conveyor
> Screen controls
> Slanted window device
> Electronic angle display for sloping windows
> Industrial PC, touchscreen with Windows PC control/NEXUS
> with Weinig type production program
Suction nozzle diameter:
------------------------------------------------
Crosscut saw 80 mm
Slotted spindle 140 mm
Profile spindle 1 140 mm
Profile spindle 2 140 mm
Fitting spindle 120 mm
Grooving device from above 80 mm
Grooving device from below 80 mm
Option:
used tools IV 68/78/92 wood and wood-aluminum
The technical characteristics of this machine should meet your expectations
do not correspond, please contact us. Our
A team with many years of experience will be happy to support you with any
adjustments
or when looking for a machine that meets your requirements!
(technical data according to the manufacturer - no guarantee!)