Arkusz

 Powrót    Drukuj

Dane techniczne

Informacje dodatkowe

Weinig Unimat 500, window version
---------------------------------
Machine will be cleaned and completely checked.

Short summary:
---------------------------------
5 spindles with option for glass bead removal

Left and upper spindle controlled for width and height:
2 axial and 2 radial CNC-controlled adjustment and positioning
of the spindles in conjunction with the memory function

CNC-controlled adjustment and positioning of the feed up/down

in conjunction with the memory function

Working width (with tool flight circle 125 mm) 20-230 mm
Working height (with tool flight circle 125 mm) 8-120 mm

Technical manufacturer description:
----------------------------------

1st spindle
----------------------------------
First lower horizontal spindle
Motor with brake 5.5 KW (7.5 HP)
Diameter 40 mm
Speed ??6,000 rpm
Tool flight circle 125 - 145 mm
Axially adjustable travel 5 mm
Folding device, including folding cutter
Table insert hardened in front of 1st lower spindle

2nd spindle
---------------------------------
First right vertical spindle
Motor with brake 7.5 KW (10 HP)
Common motor with left vertical spindle
Diameter 40 mm
Speed ??6,000 rpm
Tool flight circle 40 mm below table level 100-200 mm
Tool flight circle 55 mm below table level 100-180 mm
Max. tool diameter behind stop level 180 mm
Maximum throat depth 35 mm
Axially adjustable range 60 mm
Right spindle pneumatically controlled axially (40 mm) via selector switch,
max. saw diameter 200 mm

3rd spindle
---------------------------------
First left vertical spindle
Common motor with 1st right vertical spindle
Diameter 40 mm
Speed ??6,000 rpm
Tool flight circle 40 mm below table level 100-200 mm
Tool flight circle 55 mm below table level 100-180 mm
Maximum throat depth 35 mm
Axially adjustable range 60 mm
Axially adjustable range 60 mm
4th spindle
----------------------------------
First upper horizontal spindle
Motor with brake 5.5 KW (7.5 HP)
Diameter 40 mm
Speed ??6,000 rpm
Tool flight circle 112-200 mm
Tool flight circle for straight cutter heads max. 180 mm
Maximum throat depth 35 mm
Axially adjustable range 40 mm
Split pressure shoe in front of upper spindle, adjustable to tool flight circle and
swinging away from the tool, spring-loaded.

Pressure shoe in front of and discharge after the upper spindle with electronic
digital displays, integrated in the memory function or the PowerCom.

Upper horizontal spindle pneumatically controlled axially (40 mm) using a selector switch,
max. saw diameter 200 mm

Glass bead removal to upper spindle, pneumatically controlled up/down.

5th spindle
----------------------------------
Second lower horizontal spindle
Motor with brake 4 KW (5.5 HP)
Diameter 40 mm
Speed ??6,000 rpm
Tool flight circle 112-200 mm
Maximum throat depth 15 mm
Axially adjustable range 35 mm

Spindles in general
---------------------------------
All throat spindles dynamically balanced for high concentricity.
5 quick-release spindle nuts
Joint control of the right spindle axial, upper spindle axial and the
glass bead removal pneumatically controlled up/down.

Feed system
---------------------------------
Frequency-controlled feed, infinitely variable with brake 4 KW (5.5 HP)
Feed roller in front of 1st lower tool pneumatically controlled high-low
Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning
Rubber roller diameter 140 mm, width 15 mm
Rubber roller diameter 140 mm, width 30 mm
Adjustment path of the feed rollers compared to the left spindle, axial 35 mm
Extension of the pendulum axis compared to the left spindles to 150 mm
Machine electronics
----------------------------------
Operating voltage 400 volts (voltage range 380-420 volts), 50 hertz
Electrical design according to DIM VDE 0113, electrical equipment of industrial machines EN60204, IEC-204-1.
Other electrical regulations are not taken into account.

Machine stands, tables and stops
----------------------------------
Planing table 2m long (including jointing ruler)
Manual Waxilit pump for removing resin from the table including 5 liters of Waxilit
A driven rubber roller in the outfeed table or in front of the universal spindle
(if available), spring-loaded
Stops after the right spindle recessed to 35 mm for square strips

Pressure elements and guides
----------------------------------
Two side pressure rollers in front of the left spindle, rotating and spring-loaded
Side pressure roller on the infeed table, spring-loaded
Pressure rollers from above, spring-loaded
Side pressure elements after the left spindle, for wood width difference of
max. 100 mm
Working height min. 35 mm

Machine operation
----------------------------------
Memory function for saving the setting values ??of profiles. Spindle axes with electronic double displays
Function:
-Saving the setting values ??of the finished profile at the push of a button under a
profile number
-When the profile number is selected again, the electronic double displays
show the setting values
-By manually adjusting the spindle, the displays are brought into line
-99 memory locations

Basic equipment for the installation of the CNC-controlled adjustment and positioning

2 axial CNC-controlled adjustment and positioning of the spindles in

connection
with the memory function or PowerCom. For spindle no. 2.3

2 radial CNC-controlled adjustment and positioning of the spindle in

connection
with the memory function or PowerCom. For spindle no. 3,4

CNC-controlled adjustment and positioning of the feed up/down in

connection with the memory function or PowerCom.

Lubrication points for the axial spindle adjustment

Central position of lubrication points on the front of the machine

Safety and sound insulation
----------------------------------
Full safety cover
Easily foldable safety hood with window covers the entire
working area (feed and spindles) and protects against mechanical hazards.

When the safety hood is raised, the spindles and feed are automatically
switched off.

With the CE version (in the EC internal market), the safety hood cannot be opened
during automatic operation.

Electromagnetic locking of the safety hood (the hood can only be opened after the
spindles have stopped, approx. 15 seconds)

The machine is delivered with the CE mark

An interior light in the safety hood

For cutting work, e.g. sawing and multiple profiling, you need

suitable protective devices.

Machine without processing tools
----------------------------------
Price of the above machine on request!

----------------------------------
(Technical information according to the manufacturer - no guarantee!)