Arkusz

 Powrót    Drukuj

Dane techniczne

Informacje dodatkowe

Weinig Powermat 500 with 2 right spindles
---------------------------------------------
The machine is completely checked in our warehouse

Brief summary:
--------------------------------------------
6 spindles (2 of them right) with 8,000 rpm and 6 x HSK/Powerlock
Axially and radially CNC-controlled spindles
Large Powercom control with touchscreen
Vario hoods on spindles 3 and 5

Detailed description:
--------------------------------------------
Tool arrangement no. 019

Technical data:
---------------------------------------------
Working width 20 - 230 mm (with tool flight circle 93 - 125 mm)
Working height 8 - 120 mm (with tool flight circle 93 - 125 mm)

1. Tool holder POWERLOCK/HSK
---------------------------------------------
First lower tool holder
Motor with brake 7.5 KW
Speed ??8,000 rpm
including high-performance ball bearings
Tool flight circle 125 - 180 mm
In conjunction with PowerLock 93 - 180 mm
Axially adjustable range 17 mm
Folding device
MarathonCoating in front of 1st lower tool holder

2nd tool holder POWERLOCK/HSK
---------------------------------------------
First right tool holder
Motor with brake 5.5 KW
Speed ??8,000 rpm
including high-performance ball bearings
Tool flight circle 93 - 200 mm
Maximum throat depth 35 mm
Axially adjustable range for spindle 80 mm
Axially adjustable range for PowerLock 55 mm
Radial adjustable range
Min. tool diameter at stop level 93 mm
Max. tool diameter behind Stop level 200 mm

3. Tool holder POWERLOCK/HSK
---------------------------------------------
First left tool holder
Motor with brake 7.5 KW
Speed ??8,000 rpm
including high-performance ball bearings
Tool flight circle 93 - 200 mm
Tool flight circle for straight cutter heads max. 163 mm
Maximum throat depth 35 mm
Axially adjustable travel for spindle 80 mm
Axially adjustable travel for PowerLock 55 mm
Pressure shoe in front of left tool holder,
including 2 side pressure rollers, spring-loaded

Vario hood (2 axes):
Central adjustment of the pressure and guide elements in front of and behind the left
tool holder including electronic digital display

Axially and radially CNC-controlled

4. Tool holder POWERLOCK/HSK
---------------------------------------------
Second right tool holder
Motor with brake 5.5 KW
Speed ??8,000 rpm
including high-performance ball bearings
Tool flight circle 93 - 200 mm
Maximum throat depth 35 mm
Axially adjustable spindle 80 mm
Axially adjustable PowerLock 55 mm
Radial adjustable spindle
Min. tool diameter on stop plane 93 mm
Max. tool diameter behind stop plane 200 mm
Axially and radially CNC controlled

5. Tool holder POWERLOCK/HSK
---------------------------------------------
First upper tool holder
Motor with brake 11.0 KW
Speed ??8,000 rpm
including high-performance ball bearings
Maximum throat depth 35 mm
Axially adjustable spindle 40 mm
Split pressure shoe in front of upper tool holder on tool flight circle
adjustable and swiveling away from the tool, pneumatically

Vario hood (2 axes):
Central adjustment of the pressure and guide elements in front of and after upper
Tool holder including electronic digital display

Axially and radially CNC controlled

6. Tool holder POWERLOCK/HSK
---------------------------------------------
Second lower tool holder
Motor with brake 5.5 KW
Speed ??8,000 rpm
including high-performance ball bearings
Tool flight circle 93 - 225 mm
Maximum throat depth 15 mm
Axially adjustment range 40 mm
Radial adjustment range
Min. tool diameter to table level 93 mm
Max. tool diameter 6 mm below table level 225 mm
Axially and radially CNC controlled

All tool holders with high concentricity.
Lubrication points for the axial tool holder movement.

Feed system
----------------------------------------------
Frequency-controlled feed, 5 - 30 m/min.
continuously adjustable with brake 5 KW
Feed roller in front of 1st lower tool
pneumatically high-low controlled
Durofer pointed tooth rollers (Weinig patent)
with depth limiter and self-cleaning
Adjustment path of the feed rollers opposite
left tool holder, axial 35 mm

Machine electronics
--------------------------------------------
Operating voltage 400 volts
(voltage range 380 x 420 volts), 50 Hz
Electrical design according to DIN VDE 0113,
electrical equipment of industrial machines
EN60204, IEC-204-1. Other electrical regulations
are not taken into account. Control cabinet (with control panel) separate from
machine, distance control cabinet-machine: 2.5 m
Distance control panel - control cabinet: 3.5 m
Machine stand, table and stops
---------------------------------------------
Surface table 2.5 m long (incl. joint ruler)
Manual Waxilit pump for removing resin from the table.
One driven roller in the outfeed table,
210 mm wide, hardened
One driven roller in the machine table,
210 mm wide, hardened
Pressure rollers and guides
---------------------------------------------
Pressure rollers from above, spring-loaded
Pressure rollers can be swiveled away from above, opposite the right-hand tools
for easy tool changing
Machine operation
---------------------------------------------
PowerCom, touchscreen
Profile and tool data management software
Setting values ??can be calculated or saved. These are shown on the electronic double displays.
Touchscreen function for graphically supported operation
10,000 profile and tool storage spaces each
integrated network card for connection to OptiContro or other PCs
USB connection for manual data backup
4 axial CNC-controlled adjustment and positioning of the tool holders
in conjunction with PowerCom, spindle no. 3,4,5,6
4 radial CNC-controlled adjustment and positioning of the tool holders
in conjunction with PowerCom, spindle no. 3,4,5,6
CNC-controlled adjustment and positioning of the feed up/down
in conjunction with the PowerCom
Central position of lubrication points on the front of the machine
Safety and sound insulation
----------------------------------------------
Full safety cover
Easily foldable safety hood with window covers the entire work area and protects against mechanical
hazards.
When the safety hood is raised, the tool holders
and feed are automatically switched off. With the CE version, it is not possible to open the safety hood during
automatic operation.
Electromagnetic locking of the safety hood
(the hood can only be opened after the tools have stopped, approx. 15 seconds)
The machine is delivered with the CE mark and the associated
EC declaration of conformity.

Improved sound insulation of the full safety cover

An interior light in the safety hood
For cutting work, e.g. sawing and multiple profiling,
you need suitable protective devices.

---------------------------------------------
Option: existing tools
---------------------------------------------
Option: Weinig / Neumann RF 24 workpiece return system, stock number 2771
---------------------------------------------

(technical data according to the manufacturer - no guarantee!)