Arkusz

 Powrót    Drukuj

Dane techniczne

Informacje dodatkowe

Ruchser RU-GLS-ED 45° glazing bead saw
-------------------------------------

Developed for cutting glazing beads in pairs

The RU-GLS-ED45° double glazing bead saw can be adjusted manually to size. The
Machine was designed for cutting glazing beads in pairs with one
Cutting angle of 45° developed and has a fixed and a
movable saw unit. The manual length adjustment is equipped with
an electric digital display. Cutting lengths of 150 mm - 2650 mm can be achieved
be sawn. During the cutting process, the glazing beads are with a
pneumatic tensioning device from above and from the front to prevent tipping
of the glazing beads. It is operated via a safety
Two-hand operation. Saw blade diameter 250 mm, length 3700 mm, width 700 mm,
Voltage 400V


Pos. 1: RU-GLS-ED45° double glazing bead saw
--------------------------------------
with manual measurement adjustment, for pairs
Cutting glazing beads, cutting angle 45°.
Manual length adjustment with electric
Digital display, cutting length from 150 - 2650 mm.
Pneumatic clamping device from above and from
in front. Safety two-hand operation, saw blade diameter
250 mm, length 3700 mm, width 700 mm,
Voltage 400V
--------------------------------------
Basic price in the above version: on request!
--------------------------------------
Ex works. Plus packaging and shipping as well as current
Material cost surcharge of 6% of the total price
Options with additional costs:
--------------------------------------
Item 1.1 Set of inserts for rebated glazing beads
for RU-GLS-P45° and RU-GLS-ED45°
Price request, after checking the glazing beads.
Depending on the number of glazing beads used, this can happen
several sets of inserts are required. To determine the exact number
In order to be able to do this, we need profile drawings before order confirmation
the glazing beads to be used.
Additional charge: on request, after sending your glazing bead drawings

Pos. 1.2 Recording device for scanning gauge
RU-GL for transferring the scanning dimensions to the saw
with pneumatic installation.
Additional price: 611.00 euros

Pos. 1.3 Measuring gauge for glazing beads, total length
2550 mm, max. scanning length approx. 2450 mm
Measuring gauge made of square profile with 2 fixed and
2 adjustable cams for measuring the length of the glazing bead
Additional price: 478.00 euros

Pos. 1.4 Measuring gauge for glazing beads, total length
1500 mm, max. scanning length approx. 1430 mm
Measuring gauge made of square profile with 2 fixed and
2 adjustable cams for measuring the length of the glazing bead
Additional price: 428.00 euros

Pos. 1.5 Operating time switching device for
independent suction.
Adjustable from 5 seconds. up to 3 hours. With every sawing process
automatically becomes the set time
sucked off. Will be used again within the suction time
sawn, the set suction time begins
again from the beginning.
Additional price: 702.00 euros

Item 1.6
1 set of carbide saw blades
RU-GLS-P45 and RU-GLS-ED45°
D = 250 mm x 3.2/2.2 x 30, 80 teeth,
each consisting of 1 piece of saw blade
L6444(right) and L6443, (left),
with special grinding 43°.
Additional price: 576.00 euros
--------------------------------------

All prices in euros, net, plus statutory. VAT

(technical information according to the manufacturer, without guarantee!)