Список данных

 Назад    Печатать

Техн.данные станка

Дополнительная информация

1 WEINIG planer and moulder VARIOMATIK
---------------------------------------
Currently being completely checked and cleaned

Working width: 20 - 230 mm
Working height: 8 - 120 mm

1st spindle horizontally at the bottom
---------------------------------------
Motor with brake: 7.5 kW
Diameter 40 mm
Speed ??6000 rpm
Tool flight circle 125 - 145 mm
Axially adjustable range 5 mm
Folding device including folding cutter

2nd spindle vertically on the right
---------------------------------------
Motor with brake: 7.5 kW
Diameter 40 mm
Speed ??6000 rpm
Tool flight circle 93-232 mm
Minimum tool diameter on stop plane: 93 mm
Maximum tool diameter behind stop plane: 180 mm
Maximum moulding depth 45 mm
Axially adjustable range 30 mm
Insert segment, including additional stop lip 125 mm
Insert segment, including additional stop lip 150 mm

3rd spindle vertical left
---------------------------------------
Common motor with 1st right spindle
Diameter 40 mm
Common speed with right spindle
Tool flight circle 93-232 mm
Maximum throat depth 45 mm
Minimum throat depth with tool flight circle 200 mm: 20 mm
Axially adjustable travel under table 30 mm
Insert segment 125 mm
Insert segment 150 mm

4th spindle horizontal above
---------------------------------------
Motor with brake: 7.5 kW
Diameter 40 mm
Speed ??6000 rpm
Tool flight circle 125-200 mm
Maximum throat depth 30 mm
Minimum throat depth with tool flight circle up to 200 mm: 20 mm
Axially adjustable travel 30 mm

5th spindle horizontally below
---------------------------------------
Motor with brake: 5.5 kW
Diameter 40 mm
Speed ??6000 rpm
Tool flight circle 125-200 mm
Maximum throat depth 15 mm
Axially adjustable range 10 mm
Table plates for wood insert on lower spindle
Additional discharge plate above the lower spindle for wood insert

Feed system
---------------------------------------
Frequency-controlled feed 1.1 kW, infinitely variable 2-12 m/min
Double pendulum opposite left spindle
Adjustment range of feed rollers opposite left spindle, axial 35 mm
Durofer spray tooth rollers
Pneumatic pressure for feed rollers, including water separator
One feed roller in front of lower spindle, including separate pressure control
and pneumatically "high-low" controlled

More Features:
---------------------------------------
Machine prepared for subsequent installation
of the multifunctional table and PowerLock tool holder
Planing table 2.5 m
"Memory function" control
Width and height controlled (spindle 3 and 4 radial axis controlled)
---------------------------------------
For a detailed description, see PDF attached.
---------------------------------------

INCLUDED:
---------------------------------------
used planer heads and replacement blades as available
--------------------------------------
Price of the above machine on request!
---------------------------------------

(technical information according to the manufacturer - no guarantee!)