Список данных

 Назад    Печатать

Техн.данные станка

Дополнительная информация

Stable frame welded construction of thick-walled
Special hollow profiles , sliding table and pressure beam with
50 mm hole pattern .

On the left side continuous abutment for grouting the wide ,
lower abutment in 2 levels.

Vertical pressing cylinder on specialty bar with one-
quick adjustment with weight compensation in the 50 mm hole pattern
adjustable in height. Long sliding table ensure the
continuous recording of high jacking forces .

Fast, smooth width adjustment with ball bearing
Carriage with central fixation in 50 mm hole pattern.

Upper horizontal press cylinder infinitely adjustable in height and
equipped with counterbalance .

Lower horizontal pressing cylinders with bore for
two abutments levels without weight compensation .

Abutment and pressure plate depth 100 mm

Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders
d = 60 mm, stroke 120 mm, single-acting, with counterbalance and
One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm
stroke,
120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves ,
Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550
4200 kg compression force vertically. With 3 kW three-phase motor for 400
volts , 50 Hz
Operating voltage.

Complete with electrical connection .

Painting RAL 7035 anthracite gray with light gray RAL 7016 .

(technical details according to manufacturer - without guarantee ! )

The detailed technical description can be found in the attached pdf file