Sheet

 Return    Print

Technical details

Additional information

HOMAG Mouldteq M-300 (OPTIMAT LPP-306)
--------------------------------------
Four-side planing machine in window version
with electronic axial and radial adjustment of the spindles.

The machine is currently being checked by us.
Images 1-6 are current original images.
Images 7-10 are images of a finished machine of the same model.

Advantages:
--------------------------------------
- Flexibility thanks to variable feed and adjustable spindle speed
- Intuitive machine operation thanks to powerTouch2
- Fast setup using proLock spindle clamp
- High precision thanks to solid cast iron stand
- Ideal power transmission, as each spindle is driven by its own motor

Technical data summary
--------------------------------------
Number of spindles: 6
Working width: 250 mm
Working height: 160 mm
Planing table length: 2500 mm
Spindle speed: continuously adjustable 4,000 - 8,000 rpm
Feed speed: up to 24 m/min
WINDOW PACKAGE
Machine without processing tools

Detailed description from the manufacturer

complete description see PDF attached):
--------------------------------------
Planing and profiling machine with 6 working spindles.

Working width min. 10 mm
Working width max. 250 mm
Working height min. 10 mm
Working height max. 160 mm
CONTROL:
-------------------------------------
powerControl with powerTouch MOULDTEQ M-300
Modern control system based on Windows PC
Feed table 2,500 mm
Automatic lubricant pump
Lubrication pulses are set in powerTouch based on the
running meters.
Width-controlled guide ruler LPP306
The ruler is coupled to the left spindle, the adjustment is pneumatically
supported and clamped pneumatically after the target position is reached. Ruler
does not need to be adjusted separately by hand

FEED:
--------------------------------------
Feed speed min. 6 m/min, max. 24 m/min
Feed motor power 4 kW

Positioning of the feed carrier
Positioning is done via powerTouch.

SPINDLES GENERAL:
--------------------------------------
Tool clamping system
ProLock quick-clamping system on all tool spindles
Fast and convenient tool change

Four-fold spindle bearings
Two pairs of ground bearings in the area of
the pulley and the spindle flange
Long service life and consistent concentricity

FIRST LOWER SPINDLE:
--------------------------------------
Spindle motor power 7.5 kW
Siemens IE3 energy-saving motor
Power: 7.5 kW
Speed ??range: 6,000 rpm
Spindle diameter 40 mm
Spindle length 281 mm
System cannot be operated without a joint bevel cutter (tool)

FIRST RIGHT SPINDLE:
--------------------------------------
Spindle motor power 7.5 kW, adjustable
Siemens IE3 energy-saving motor
Spindle speed continuously adjustable
Power 7.5 kW
Speed ??range 4,000 rpm to 8,000 rpm
Spindle diameter 40 mm
Spindle length 176 mm
Motorized positioning radial
Motorized positioning axial
FIRST LEFT SPINDLE:
-------------------------------------
Spindle motor power 7.5 kW, adjustable
Siemens IE3 energy-saving motor
Spindle speed continuously adjustable
Power 7.5 kW
Speed ??range 4,000 rpm to 8,000 rpm
Spindle diameter 40 mm
Spindle length 176 mm
Motorized positioning radial
Motorized positioning axial
FIRST UPPER SPINDLE:
--------------------------------------
Spindle speed continuously adjustable
Power 7.5 kW
Speed ??range 4,000 rpm to 8,000 rpm
Spindle diameter 40 mm
Spindle length 266 mm
Motorized positioning radial
Motorized positioning axial
SECOND UPPER SPINDLE:
-------------------------------------
Spindle speed continuously adjustable
Power 7.5 kW
Speed ??range 4,000 rpm to 8,000 rpm
Spindle diameter 40 mm
Spindle length 266 mm
Motorized positioning radial
Motorized positioning axial
Glass bead removal
When the function is selected, the pressure shoe cycles (in the direction of
travel) to the left and simultaneously brings the splitting wedge and the
kickback protection into position
- Workpieces up to a minimum of 10 mm in height can also be produced with the
glass bead saw clamped in place
- No manual adjustment required
- There is only one axial position of the glass bead saw for removing the glass
bead
SECOND LOWER SPINDLE:
--------------------------------------
Spindle speed continuously adjustable
Power 7.5 kW
Speed ??range 4,000 rpm to 8,000 rpm
Spindle diameter 40 mm
Spindle length 266 mm
Electronic double display radial
TARGET values ??are specified by powerTouch,
ACTUAL values ??are set manually using the hand crank.

Motorized axial positioning
Technical information according to the manufacturer - without guarantee!