Sheet

 Return    Print

Technical details

Additional information

Glazing and control press Ruchser RU-VGPA 3
-------------------------------------------------
Maximum clamping width 3,000 mm, minimum 300 mm

Length: 4,150 mm
Width: 900mm
Height: 2,700mm

System height: 1,900 mm
Press beam height: 2,400 mm
Clamping beam depth: 150 mm

System part covered with felt

Installation surface as a roller conveyor, roller length and roller spacing 200 mm

Lifting device: 300 to 800 mm with a lifting cylinder on the left and right, one
Synchronization device consisting of a continuous synchronization shaft
gears.

Two pneumatically foldable and movable press beams.
Simultaneous, synchronous folding and movement of the press beams via a
Single foot valve, which means the least amount of time is required when opening and closing the valve
Press.

Safety control when building up pressure.
One roll each on the left and right as edge protection for elements up to 2,500 mm high.

Load capacity: 600 kg
-------------------------------------------------
Price of the above machine: on request!
-------------------------------------------------

Options with additional costs:

Item 1.1 Item No. 5130: EUR 750.00
System part with rubber rollers,
Ø 48 mm, roller spacing 50 mm,
for RU-VGPA3

Item 1.2 Item No. 7081-10: EUR 453.00
Steel angle covered with felt
mounted above the roller strips
for RU-VGPA-3(E)
These prevent the windows from “rattling”.
when pushing. The additional bars
replace the lower roller bars
for system parts with double rubber roller strips.
-------------------------------------------------
Total price in this version: on request!
Ex works plus packaging and shipping, plus VAT.

(Technical information according to the manufacturer - no guarantee!)
-------------------------------------------------