Sheet

 Return    Print

Technical details

Additional information

1 GUBISCH – CENTROMAT CW 2
---------------------------------------

Manufacturer description:
---------------------------------------
For window and door production, with 50 mm spindle diameter in
longitudinal profiling. With the following processing stations and options:

- Slotting machine on one side for straight and angled connections Milling
machine
for longitudinal profiling
- Rebating operation with synchronous milling unit and automatic plunge.
Pivoting frame support up to 650 mm
- Central control

1.0 cross-cut saw automatically plunges from above
---------------------------------------
Motor power, including motor brake: 3.0 kW
Spindle speed: 2,800 rpm.
Cutting circle diameter: 350 mm diameter
Spindle diameter: 30 mm diameter
Clamping flange, 1 driver 6 mm diameter TK 42, 120 mm diameter
Pneumatic vertical stroke: 100 mm
Pneumatic horizontal stroke: 160 mm
against 2 manually adjustable 6-way turret stops
Chip extraction hood with extraction nozzle 100 mm diameter

2.0 slot unit
---------------------------------------
Motor power, including motor brake: 9.2 kW
Spindle speed: 3,800 rpm
Flight circle diameter: 320 mm diameter
Spindle diameter: 50 mm diameter
Usable spindle length: 320 mm
Pneumatic vertical stroke fixed: 2 x 100 mm
Suitable for 3 tool sets of 100 mm each
Zero height: 10 mm
Chip extraction hood with extraction nozzle: 160 mm diameter

3.0 Slotting table
---------------------------------------
Table height above floor 920 mm
Feed for 4 speeds freely adjustable:
- 1. Milling, slanting window and typing speed can be set in the table
(approx. 7 m/min.)
- 2. Sawing speed approx. 7 m/min. (can be set on the device)
- 3. Transfer speed approx. 10 m/min. (can be set on the device)
- 4. Return speed/without processing approx. 25 m/min. (can be set on the
device)
- Motor power, including motor brake 0.37 kW
Workpiece clamping pneumatic Pendulum pressure shoes
Workpiece clamping pneumatic
1 clamping cylinder with 2 additional pressure shoes

3.1 Counter wood device Counter wood changer with 2-way automatic change and
then with manual. Rotation of 180 degrees, 2 further counters possible, which
then
also counter in automatic mode

3.2 Length stop
---------------------------------------
- Stop system with 3 scales for
- a) outside frame
- b) outside sash upright
- c) outside sash crosswise Adjustment manually
- Length with attachable extension 3000 mm
- for sloped windows, pivotable +/- 60 degrees 3.3 Angle transfer -
automatic via vertically clocked feed roller in the milling feed

4.0 Milling machine For longitudinal profiling and rebating of windows/doors
with

the following units:
---------------------------------------

4.1 First profile milling unit
----------------------------------------
- Counter-rotation
- Synchronous rotation with automatic plunge can be used for rebating
- Motor power including motor brake: 9.2 kW
- Spindle speed: 6000 rpm.
- Cutting circle diameter: 240 mm max.
- Spindles adjustable for zero diameter 140 mm max.
- of tools 112 mm min.
- Zero height: 10 mm
- Spindle diameter: 50 mm diameter
- Spindle usable length: 320 mm
- Vertical stroke pneumatically fixed,
- suitable for 4 tool sets of 80 mm each, 3 x 80 mm
- Horizontal stroke pneumatic: 80 mm
- Chip extraction with extraction nozzle diameter 140 mm

4.2 Second profile milling unit
---------------------------------------
- Counter rotation
- Motor power including motor brake: 9.2 kW
- Spindle speed: 6000 rpm.
- Cutting circle diameter: 240 mm max.
- Spindles adjustable for zero diameter 140 mm max.
- of tools 112 mm min.
- Zero height: 10 mm
- Spindle diameter: 50 mm diameter
- Spindle usable length: 320 mm
- Vertical stroke pneumatically fixed,
- suitable for 4 tool sets of 80 mm each, 3 x 80 mm
- Horizontal stroke pneumatically: 80 mm
- Chip extraction with extraction nozzle diameter 140 mm

4.3 Third profile milling unit
---------------------------------------
- Counter rotation
- Motor power including motor brake: 9.2 kW
- Spindle speed: 6000 rpm.
- Cutting circle diameter: 240 mm max.
- Spindles adjustable for zero diameter 140 mm max.
- of tools 112 mm min.
- Zero height: 10 mm
- Spindle diameter: 50 mm diameter
- Useful spindle length: 320 mm
- Fixed pneumatic vertical stroke,
- Suitable for 4 tool sets of 80 mm, 3 x 80 mm
- Pneumatic horizontal stroke: 80 mm
- Chip extraction with extraction nozzle diameter 140 mm

4.4 Glazing bead saw unit
---------------------------------------
- Counter rotation
- Motor power including motor brake: 3.0 kW
- Spindle speed: 2800 rpm
- Spindle diameter: 30 mm
- Useful spindle length: 15 mm
- Cutting circle diameter: 200 mm
- Clamping flange, 1 driver 6 mm diameter, TK 42 mm - 85 mm diameter
- Pneumatic vertical stroke
- Glazing bead removal including kickback protection on the unit
- Chip extraction hood with extraction nozzle diameter 80 mm
- Incl. electrical control

4.5 Feed
---------------------------------------
- Motor power: 0.75 kW
- Feed speed: 8 m/min.
- Feed roller diameter: 100 mm
- Roller spacing in the area of
the processing units 110 mm
in the area of ??the feed 200 mm
- Feed rollers individually adjustable at an angle to the stop

4.6 Vertical right stops
---------------------------------------
- Height 85 mm
- Stop 1, set for 1 mm chip removal
- Stops 2 + 3 pneumatically timed for zero or 1 mm chip removal
- Spindles adjustable for zero diameter 112 – 140 mm

5.0 Workpiece return device
---------------------------------------
The finished workpieces are returned to the
operating personnel via an inclined roller conveyor

6.0 PLC central control
---------------------------------------
- Electronic freely programmable sequence control for - 99 programs
- additional 50 combination programs
- 1 combination program, max. 8 steps (=workpieces) corresponds to 1 single-wing
window
- Plain text display via 2-line display
- Single and combined operation with automatic angle transfer function
- extremely simple, easy to understand, logically structured handling of the
Control

7.0 Workpiece dimensions:
---------------------------------------
- Slotting unit: length min. 200 mm + tenon
Width min. 42 mm, max. 200 mm
Thickness min. 42 mm, max. 80 mm

- Milling unit: length min. 220 mm + tenon ***
Width min. 42 mm, max. 200 mm
Thickness min. 42 mm, max. 80 mm

- Beveling unit: frame length min. 400 mm

*** If the special accessory double parts package is used, length max. 1700
mm, min. 400 mm + tenon length

8.0 Technical connection data
---------------------------------------
- Compressed air connection 3/8“: 8 bar
- Compressed air consumption
- (conditioned air according to Pneurop 6611) 590 NL/min.
- Extraction air volume: 152 m3/min.
- Operating voltage: 380 V., 50 Hz.
- Total connected load: 44.0 kW
- Extraction air speed: 32 m/sec.
- Electrical equipment in accordance with VDE 0113 /IP 54
- Loading weight approx. 4240 kg

Special accessories:
---------------------------------------
- Double parts package for processing 2 parts (e.g. upright wing)

Length = min. 400 mm (2x50 mm/ max. 2x90 wide) up to
max. 1,700 mm workpiece length

- Electronic angle display
A magnetic sensor scans the swivel movement carried out using a magnetic strip
attached at a defined radius.
The display, which can be read in 1/10°, is clearly visible on the
controlcabinet. In the 90ø position, which is defined by a pin, the LED display
is set to "O". Every swivel movement (+/- 60°) is displayed - Laser beam device
to display the cutting joint

Option: used tools: Leitz IV 68 wood, wood-
aluminum; Gold IV 78 wood


(technical information according to the manufacturer -
no guarantee!)