Données

 Retour    Imprimer

Détails techniques

Informations supplémentaires

HECHT double miter saw Exenso DS350E - 3000 mm
--------------------------------------

For wooden glass strips, rungs, profile strips, aluminum strips, etc.

Pos. 1.1 Article number 942.5103
1 piece HECHT Exenso DS350E
- Working length 3000 mm
- Swivel range 22.5° (inside) to 135° (outside)
- Right head movable
- Saw blade holder Ø 350 mm
- Incl. 1 piece center support.
- Units clamped pneumatically.
- Positioning control Exenso DS3 with touch panel 15" display in
dust-proof monitor housing.
- 3-axis control, 1 longitudinal axis and 2 swivel axes.
- Entering the cutting data by hand
- Processing data from a cutting list (data set according to specification)
- Processing measuring rod data (GMF wireless caliper)
- Ethernet connection 10/100 (TCP/IP)
- USB interface
- Incl. control cabinet, motor and software licenses.

Item 1.2 Item number 723.0121
2nd DS saw blade wood
Bevel/bevel/flat tooth - positive

Item 1.3 Item number 942.5236
2 sets of DS workpiece clamping combined
Combined workpiece clamping consisting of:
Pneumatic swivel clamp - for clamping the material from above.
(Free access to the work table)
Pneumatic horizontal clamp - anti-twist clamping cylinder with pressure piece.
The clamps can be selected individually via the saw control.
The clamping sequence can also be set via the control.
Including safety pre-tensioning pressure
Scope of delivery for 2 sets:

- 2 pieces (left/right) vertical swivel clamps.

- 2 pieces (left/right) horizontal clamps.

Item 1.4 Article number 942.5997
DS pneumatic feed device

Item 1.5 Article number 945.2007
Packaging DS350 (transport frame)
--------------------------------------
Total price in this version - on request!
--------------------------------------

ALTERNATIVE options, prices on request!
--------------------------------------
For horizontal clamping of the remaining pieces with blunt glass strips instead of

the 2nd set Item 1.3 943.5236 DS workpiece clamping combined!

Pos. 2.1 Article number 942.5201
ES / DS workpiece clamping from the front
- 2 clamping cylinders with anti-twist protection
- 2 cylinder holders with clamping lever
------------------
For rebated glass strips, instead of standard panels without a groove:

Pos. 2.2 Article number 942.5241
DS350 table supports grooved according to customer sample
The assembled table supports are milled according to the customer's drawing.
Please send us all profile drawings that are to be sawn
(pdf, dxf and hand samples)

------------------
If, for example, aluminum is also to be sawn:
Item 2.3 Article number 942.5203
DS hydropneumatic feed device (instead of pneumatic feed cylinder)
------------------

OPTIONAL accessories, with additional charge on request:
-----------------------------------
Item 2.4 Article number 942.5237
DS "Excess length" software (subsequent steps must be confirmed)
Sequence control including hardware. After entering a cutting dimension > max.
cutting length of the system, the cutting is carried out in a cyclical manner. (Left unit
cuts, right unit moves the material and cuts
to size.)
------------------

Item 2.5 Article number 944.1023
GMF caliper 3000mm complete set (1500mm plus extension 1500mm)
incl. charger and receiver.
A robust aluminum measuring rail with a measuring range of 3,000 mm is
ideal for measuring glazing beads.
Function
For use on doors and large window sashes, the GMF caliper can be
safely and quickly mechanically extended to a measuring length of 3,000 mm.
Base length: 1,500 mm
Extension: 1,500 mm, automatic detection
Accuracy of ±0.1 mm
Resolution of 0.02 mm.
Measurement transmission via radio interface to the control or PC.
Microcontroller charger for battery pack 100-240V input voltage and
mains adapter for Euro/UK/US/AUS.

Item 2.6 Item number 945.2006
Packaging GMF pipe Ø220x2000 mm

------------------
If you want the saw to be controlled by your window construction software:

No problem: Hecht's software department will also help you adapt
your existing data set for transfer to the saw!

Item 2.7 Item number 942.9999
Exenso data interface
Reading in a data set for quick and convenient positioning.

Note: Please check the HECHT standard data set description and send us a sample data set. Deviations from this data set are programmed separately and the effort is calculated.
Please provide us with sample data sets that cover all relevant processing/information.

The data interface is compatible with:

- Hecht Exenso Comfort from model year 2019

- Hecht Exenso double miter saw DS 350 from model year 2019

Price depends on effort, please ask us!
------------------

Please also note options in our new machine offers such as

Working length 4,000 mm

Spray device for aluminum saws

and much more!

(Technical information according to the manufacturer - no guarantee!)