Список данных

 Назад    Печатать

Техн.данные станка

Дополнительная информация

1 used Weinig Unicontrol 6 window system
----------------------------------------------
Manufacturer's description:

For the production of individual parts, elements, and small series.

Spindle arrangement:

One cross-cutting saw, one single-sided tenoning and slotting spindle,
one right-hand profiling spindle, one tenoning and slotting spindle, and
profiling spindle suitable for holding multiple tools stacked on top of each
other, with pneumatic spindle movement.

Slotting table with motorized table movement and automatic
transfer to the continuous, chainless rubber roller feed of the profiling unit.
Feed height adjustment manually.

Workpiece clamping via 2 pneumatic clamping cylinders.

Length stop with scale and magnifying glass for frame or sash external
dimensions.

Tool positions (longitudinal and transverse machining)
controlled via selector switch on the control panel.

Technical Specifications
----------------------------------------------
Crosscut Saw
---------------
Number of Tools: 1
Spindle Speed: 2,800 rpm
Spindle Diameter: 40 mm
Max. Tool Diameter: 350 mm
Motor: 3 kW

Mortise and Slot Spindle
--------------------------------
Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92
Spindle Speed: 3,500 rpm
Spindle Diameter: 50 mm
Tool Clamping Length: 320 mm
Max. Tool Diameter: 320 mm
Motor: 11 kW

Profile Spindle
----------------
Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92
Spindle Speed: 6,000 rpm
Spindle Diameter: 50 mm
Tool clamping length 320 mm
Max. tool diameter 232 mm
Motor 11 kW

Special equipment:

Synchronous spindle
-----------------------
Pneumatically timed forward/backward for tear-free rerouting of window sashes,
frames, and doors.
Spindle diameter 50 mm, 4 kW
Tool clamping length 120 mm, zero tool diameter 112-140 mm
Max. tool diameter 232 mm, spindle speed 6000 rpm

Motor boost for synchronous spindle from 4 kW to 7.5 kW

Screen control for 99 window types.

One type can contain up to 8 different parts, each with 2 end profiles
and 2 longitudinal profiles. Production options: single parts, double parts,
frame-by-frame, series, rerouting. Data entry via keyboard with integrated
operator guidance and error diagnostics.

1 Grooving spindle from above
--------------------------------
Motor power: 2.2 kW
Speed: 6000 rpm
Spindle diameter: 40 mm, with 10 x 4 mm key
Clamping length: 13 mm
Clamping length: 40 mm
Axial stroke, 2 positions
Radial stroke, 2 positions
Max. tool diameter: 130 mm

Grooving spindle motor boost from 2.2 to 3 kW

1 Fitting milling unit, right:
---------------------------------------
For milling fitting grooves in the circumferential milling pass or for
grooving in the longitudinal profile.

Pneumatic horizontal movement with selector switch on the control panel.

Motor power: 2.2 kW
Speed: 6000 rpm
Spindle diameter: 40 mm
Clamping height: 125 mm
Tool cutting radius: min. 140 mm, max. 180 mm
Home position below table level: 10 mm

Special design of the fittings milling machine:
Clamping length 150 mm
Axial stroke 80 mm, 3 positions
3 tools
Radial cycle, 2 positions

Motor booster for the hinge milling spindle from 2.2 to 3 kW

Hinge milling spindle for 230 mm tool diameters in and above the table

Electric height adjustment of the feed with selector switch on the control panel
to 2 wood sizes, including pneumatic clamping of the feed beam

Infinitely variable feed rate, 6-12 m/min.

6 blow-off nozzles for the router table mounted on the feed

Motor booster for the tenon cutter from 7.5 to 11 kW

Motor booster for the profiling spindle from 5.5 to 11 kW

Electronic spindle brake for the tenon and slotting spindle.

5 Mechanical spindle brakes for the crosscut saw, synchronous spindle,
profiling spindle and additional units.

Double-part package:
Performance increase of 40-80%. This is largely influenced by the number of
workpieces of the same profile.

Double-part package with double-part clamping,
cross-separation, and retention latch.

Slotting table with double workpiece clamping for two parts with the same
longitudinal profile. After the slotting process, the two parts are
automatically separated and transferred for longitudinal profiling. In this
case, the parts can also be of different widths. An additional support for long
workpieces allows the slotting table to be retracted early while the second
piece of wood is still waiting.

With this device, individual workpieces can also be moved without prior
adjustment.

Horizontal cross-cut saw, pneumatically indexed against a 4-station turret

Return roller conveyor with automatic ejection and extraction rollers
(max. wood width 140 mm)

Interlocking length stop, adjustable from 0-50 mm for different tenon or
slot lengths

Length stop (including electronic numerical display) pivots +/- 60 degrees in
both directions for the production of studio windows. Max. wood width 200 mm.

Slidable edge strip, clamped by spring pressure

Additional clamping from the front

Inclined position, pneumatically clamped

Scribing template for zero diameter

Laser beam device

Electric locking for safety cover for accident prevention.
In the closed position, access to the running machine is prevented.

Reversing switch for up-cut milling of the down-cut spindle

Optional: Oertli IV 68/82 wood and wood/aluminum
----------------------------------------------
Price of the above-mentioned machine upon request!
----------------------------------------------

(Technical specifications according to the manufacturer - no guarantee!)