Sheet

 Return    Print

Technical details

Additional information

S&S frame press Bavaria 2000 L
---------------------------------

With automatic pressing cycle + manual control
for corner connections tenon+slots and dowel connection/mortised tenon,
can be switched using a selector switch on the control cabinet.

With basic equipment for optional use of counter profiles if the sash
is rebated on the loose part.

CE version
Basic machine in the strongest frame welded construction,

with thick-walled special hollow profiles.

Guideways of the pressure beams for the press corners
in a low-abrasion machined version.

Fast, smooth, manual width adjustment
using ball-bearing carriage, fixing in 50 mm
hole grid, optional motorized width adjustment with
hydraulic clamping (at an additional cost).

Height adjustment and pressing using long-stroke cylinders
in one work cycle. Right-hand press corners with integrated horizontal
cylinders, therefore no vertical positioning of the horizontal pressure
cylinders is necessary, which avoids cylinder collisions.
Lower support can be adjusted in several positions to the most suitable
insertion height. 3 KW compact hydraulic system with integrated control block,
variable pressure control from 20 - 120 bar, pressure gauge Control via touch
button with separate control circuits for the vertical and horizontal press
cylinders, mounted on a freely movable control panel. 2 vertical press
cylinders, double-acting, stroke adapted to
working height, piston diameter 60 mm
Pressure force per cylinder max. 2100 kg
2 horizontal press cylinders, double-acting,
80 mm stroke, piston diameter 40 mm
Pressure force per cylinder max. 1250 kg
Abutment and pressure plate depth 100 mm
Control cabinet on the machine base on the left, 400 volts, 50 Hz
Machine with ready-to-connect plug 16 A
Paint: RAL 7035 light gray with RAL 7016 anthracite gray
Working size: length x height = 4,500 mm x 2,750 mm
Note:
Actual working size: 4,500 x 3,000 mm (length x height)
Space required: 5,500 mm x 1,400 mm x 3,550 mm (LengthxWidthxHeight)

Article 00001147
------------------------
1 medium pressure bar complete with pressure cylinder,
pressure hose and shut-off valve up to 2,750 mm high
Note: actual working height: 3,000 mm

Article 00000471
------------------------
Individual pressure control for medium pressure bar,
pressure control range up to max. 100 bar
(For pressing cross-bar windows)

Article 00000112
-----------------------
infinitely height-adjustable cross pressure device,
complete with pressure cylinder and abutment,
throttle and shut-off valve

Article 00000481
------------------------
Individual pressure control for cross pressure device
pressure control range up to max. 100 bar
(For pressing cross-bar window)

Article 000000391
-------------------------
Shut-off valve on the 3rd vertical cylinder

Article 00000391
-----------------------
Shut-off valve on the upper horizontal cylinder

Article 00001005
------------------------
3 x slanted window control for vertical cylinder

Article 00000302
----------------------
3x pendulum pressure plates attachable
for pressing up to 60 degrees

Article 00000631
-----------------------
Double pendulum pressure plate
for pointed window (triangle)

Article 00000113
-----------------------
2 x extension for pendulum pressure plate
for pointed window (triangle)

Article 00000057
-----------------------
Intermediate allowance for Smallest size pressing
to bridge the 1st pressure beam,
including shut-off valve on the 1st vertical cylinder

Article 00000100
-----------------------
Motorized width adjustment with digital display,
including semi-automatic width target positioning using
keyboard input and 2 approval buttons

Article 00001001
-----------------------
Machine equipped for pressing
"tenons + slots" and additional pressing cycle
for pressing "dowel connections" or
"Plugtec", can be changed on the operating display

Article 00001002
-----------------------
6x pressure unit support and pressure plate depth 120 mm

Article 00001003
-----------------------
Basic equipment for counter profiles

Article 00000632
-----------------------
Electronic pressure pre-selection device
for 6 different, fixed programmed
pressure levels (can be changed at any time)
Pressure levels for the 4 hydraulic circuits (version with inclined
window control):
? Vertical cylinder 1
? Medium pressure beam (= vertical cylinder 2)
? Vertical cylinder 3
? Horizontal cylinder 4+6
Note:
The transverse pressure cylinder (= horizontal cylinder 5) can be controlled
independently using an optional
manual pressure control valve

Article 00001126
-----------------------
Control cabinet on the inside of the machine,
mounted on the back, accessible from the front

Article 0000127
------------------------
Press height modification 2750/3000 mm
The machine is supplied with a pressure beam of 3,000 mm height
The cylinder attachment and the positions of the lower press corners
however correspond to the version with a press height of 2,750 mm.
By installing 3 300 mm long piston rod extensions
the max. press height can be increased to 3,000 mm.
With the help of the tools supplied, the
machine can be converted within approx. 10 minutes.

Insertion heights:
- lower insertion height for sashes with a width of <550 mm; approx. 1280 mm
- insertion height upper edge of upper horizontal frame wood up to press height
2,750 mm; approx. 1,620 mm
- insertion height upper edge of upper horizontal frame wood press height
>2,750 mm; approx. 1,920 mm (piston rod extension installed)

Scope of delivery:

1 support plate

3 piston rod extensions 300 mm

1 open-end wrench size 30

1 ratchet with socket wrench size 24

1 holder for piston rod extensions and tools

Notes:

- The height correction for machines with positioning function is carried out

by switching parameters. The operation of the machine with the

installed piston rod extensions is displayed by a different

screen background.

- Total height of the machine approx. 3,550 mm

---------------------------------

Total price in the above version: on request!

Options with additional costs:

----------------------

Article 00001004

----------------------

Counter profiles, price per piece: 260.00 euros

Other options such as other working dimensions on request!

(Technical information according to the manufacturer - no guarantee!
Images may differ from the original, prices net, plus VAT (domestic))